<code id="q5az5"><nobr id="q5az5"><sub id="q5az5"></sub></nobr></code>
<code id="q5az5"></code>
  • <strike id="q5az5"><sup id="q5az5"><samp id="q5az5"></samp></sup></strike><tr id="q5az5"></tr> <tr id="q5az5"><sup id="q5az5"></sup></tr>

        首頁 產品中心 柴油車煙度計

        PRODUCTS CENTER
        柴油車煙度計
        HPC602不透光煙度計


        主要功能特點:

        分體式結構設計,操作更方便,數據更精確;
        采用分流式取樣技術、柴油機加速、減速和穩速時均可測量煙度;
        數據自動線性化處理,可顯示不透光度N、光吸收系數K和對應濾紙式煙度值SF;
        高亮度數碼顯示;
        采用“空氣幕”技術保護光學系統免受污染;
        檢測室自動恒溫控制,可防冷凝而影響測試精度;
        附自動時間顯示;可選配轉速測量和油溫測量;
        出現故障自動診斷顯示所在單元;
        配內置打印機或藍牙、RS232、模擬接口;
        符合ISO11614和GB3847-2018技術要求。

        主要技術參數:

        測量范圍       不透光度N:  0~99.9%(相當煙度值0~10FSN)
        光吸收系數K:0-16.06m-1
        轉速:0-9990rpm     油溫: 0-150℃
        示值誤差       ≤±2%(測量值)
        穩 定 性        自動校零,量矩漂移≤±1%/4h
        重 復 性        重復誤差≤±1%
        分 辨 率        N為0.1%, K為0.01m-1 ,轉速為10rpm,油溫為0.1℃
        輸出方式       數字直讀顯示,可附打印機打印煙濃度(暗度)最大值,測試
        時間、日期等??筛浇涌谂c計算機聯網
        測量室溫度    70℃(自動恒溫),當溫度誤差≥±10%時,溫度及錯誤指示燈亮
        環境條件        溫度-5~50℃,相對濕度≤90%
        電      源        AC100-240V 50/60Hz 消耗功率150VA
        外形尺寸        控制單元 240mm(長)×310mm(寬)×170mm(高)
        (含支架)     測量單元 130mm(長)×400mm(寬)×390mm(高)
        重      量         控制單元  4k
        測量單元  5kg

        Main Features:

        ◆Separated structural design, operation more convenient and more accurate data.
        ◆Adopted a triage-type sampling technique, diesel engine acceleration, deceleration, and steady speed can be measured when the smoke;
        ◆Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K and the corresponding value of filter paper-type smoke SF;
        ◆High-brightness digital display;
        ◆Use of "air curtain" technology to protect the optical system from contamination;
        ◆Automatic detection of room temperature control, anti-condensation can affect the test accuracy;
        ◆Automatically attached to the time display; optional speed measurement and oil temperature measurement
        ◆Show where the failure of automatic diagnosis unit;
        ◆Equipped with built-in printer (or Bluetooth / RS232 interface);
        ◆In line with ISO11614 and GB3847-2005 technical requirements.

        Main technical parameters:

        Test ScopeNo light transmission N:0100% (equivalent to smoke value 0~10FSN)

        Light absorption coefficient K:016.06 m-1

        RPM09990rpm OIL TEMP: 0150℃

        Indication error: ≤±2% ( measured value)

        Stability:moment drift≤±1%/4H

        Repeatability ≤±1%

        Resolution: N:0.1%, K:0.01m-1 ,RPM:10rpm, OIL TEMP:0.1℃

        Output mode:digital direct reading, can be attached to the printer to print the smoke concentration ( darkness) maximum value, test time, date. Can interface with computer networking

        The measurement chamber temperature:

        70 ℃ (automatic), when the temperature error of ± 10%, temperature and error indicator light

        And-use temperature: -5~50°C, Relative humidity: 90%

        Power: AC100~240V 50/60Hz or DC12V, Power consumption: 150VA

        Dimensions: control unit: 240(L)×310(W)×170 (H)mm

        ( including bracket) measuring unit: 130(L)×400(W)×390(H)mm

        Control unit: 4kg

        Measuring unit: 5kg

        欧美色视频在线播放_久青草视频精频在线观看_日本不卡一区二区高清_亚洲欧美中文日韩视频