• <object id="2g8pk"></object>
    <strike id="2g8pk"><sup id="2g8pk"></sup></strike>
    <big id="2g8pk"><nobr id="2g8pk"><track id="2g8pk"></track></nobr></big>

      <code id="2g8pk"></code>

      <center id="2g8pk"></center>
      1. 首頁 產品中心 柴油車煙度計

        PRODUCTS CENTER
        柴油車煙度計
        HPC601便攜式不透光煙度計



        主要功能特點:

        便攜式一體化結構設計;
        采用分流式取樣技術、柴油機加速、減速和穩速時均可測量煙度;
        數據自動線性化處理,可顯示不透光度N、光吸收系數K和對應濾紙式煙度值SF;
        高亮度數碼顯示;
        采用“空氣幕”技術保護光學系統免受污染;
        檢測室自動恒溫控制,可防冷凝而影響測試精度;
        附自動時間顯示,可選配轉速測量和油溫測量;
        出現故障自動診斷顯示所在單元;
        配內置打印機或藍牙、RS232、模擬接口。
        符合ISO11614和GB3847-2018技術要求。


        主要技術參數:

        測量范圍            不透光度N:0~99.9%(相當煙度值0~10FSN)
        光吸收系數K:0~16.06m-1
        轉速:0-9990rpm     油溫: 0-150℃
        示值誤差            ≤±2%(測量值)
        穩 定 性            自動校零,量矩漂移≤±1%/4h
        重 復 性            重復誤差≤±1%
        分 辨 率            N為0.1%, K為0.01m-1 ,轉速為10rpm,油溫為0.1℃
        輸出方式           數字直讀顯示,可附打印機打印煙濃度(暗度)最大值,測試
        時間、日期等??筛浇涌谂c計算機聯網
        測量室溫度        70℃(自動恒溫),當溫度誤差≥±10%時,溫度及錯誤指示燈亮
        環境條件           溫度-5~50℃,相對濕度≤90%
        電      源            AC100-240V 50/60Hz 消耗功率150VA
        外形尺寸          (含支架)160mm(深)×400mm(寬)×480mm(高)
        重      量            約8kg

        Main Features:

        ◆Integrated Structural Design
        ◆Adopted a triage-type sampling technique, diesel engine acceleration, deceleration, and steady speed can be measured when the smoke
        ◆Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K and the corresponding value of filter paper-type smoke SF
        ◆High-brightness digital display;
        ◆Use of "air curtain" technology to protect the optical system from pollution
        ◆Automatic detection of room temperature control, anti-condensation can affect the testing accuracy
        ◆Automatically attached to the time display, and optional speed measurement and oil temperature measurement
        ◆Show where the failure of automatic diagnosis unit;
        ◆Equipped with built-in printer (or Bluetooth / RS232 interface)

        ◆In line with ISO11614 and GB3847-2005 technical requirements.

        Main technical parameters:

        Test ScopeNo light transmission N:0100% (equivalent to smoke value 0~10FSN)

        Light absorption coefficient K:016.06 m-1

        RPM09990rpm OIL TEMP: 0150℃

        Indication error: ≤±2% ( measured value)

        Stability:moment drift≤±1%/4H

        Repeatability ≤±1%

        Resolution: N:0.1%, K:0.01m-1 ,RPM:10rpm, OIL TEMP:0.1℃

        Output mode:digital direct reading, can be attached to the printer to print the smoke concentration ( darkness) maximum value, test time, date. Can interface with computer networking

        The measurement chamber temperature:

        70 ℃ (automatic), when the temperature error of ± 10%, temperature and error indicator light

        And-use temperature: -5~50°C, Relative humidity: 90%

        Power: AC100~240V 50/60Hz or DC12V, Power consumption: 150VA

        Dimensions ( including bracket) :160 ( L)×400(W)×480 (H)mm

        Weight: 8kg

        上一篇:暫無    下一篇: HPC606便攜式不透光煙度計

        欧美色视频在线播放_久青草视频精频在线观看_日本不卡一区二区高清_亚洲欧美中文日韩视频